An awning is a wear–resistant and multifunctional product. However, it may break during prolonged use. To avoid problems on the road, an urgent awning repair in Saint Petersburg. After all, the longer a vehicle with a worn-out structure is in operation, the sooner it will fail.
Preparatory work
Regardless of the method of repairing cuts and damages, the complex of preparatory measures will be similar. If the truck awning is repaired in winter, then the car must be brought to a heated room. Before starting work, the damaged area of the awning is cleaned of dust and dirt and thoroughly dried. The uneven edges of the awning fabric are adjusted using a stationery knife – protruding threads are removed. Then the surface of the awning is degreased. To do this, you can take acetone. Only after all these works can you start repairing the car awning.Methods for eliminating cuts and damage to the awning
The truck awning is a high-strength fabric impregnated with PVC. The material is not afraid of water, is resistant to the vagaries of the weather and provides increased tightness. However, various mechanical impacts can cause cuts and damage. Minor defects can be restored using tape, a hair dryer or glue. The choice of awning repair method in St. Petersburg depends on the availability of spare pieces of awning fabric and a set of tools at hand. Let’s look at each of the possible methods in more detail.Scotch tape patch
This method of awning repair is suitable for temporary elimination of cuts and damages. The awning tape has a special structure. On the front side it consists of a polymer, and on the back side – of a rubber adhesive base. This method of awning repair is suitable for temporary elimination of cuts and damages. The awning tape has a special structure. On the front side it consists of a polymer, and on the back side – of a rubber adhesive base. Remember that the temperature at which you can use tape should be between -20 and +50 degrees.Repair with a hair dryer
If the driver has a piece of awning, he can repair the damaged area using a special industrial hair dryer. Such a device will help to carry out an effective and fast repair with a minimum of effort. The work is carried out in stages:- The surface to be treated is degreased.
- After degreasing the damaged area, a patch is cut out for it with a small margin around the perimeter of the defect.
- The fabric is aligned at the site of the cut or damage and placed on a backing.
- The surface of the base and patch is heated with a hair dryer until the top layer of the awning melts.
- The damaged area is rolled again with a roller, with the help of which the edge is pressed tightly against the awning fabric. Now all that remains is to heat the damaged area and roll the roller over it. Thanks to this process, the two layers of the awning stick together securely.
Repair using glue
This method of car awning repair requires compliance with the main condition – the work must be carried out at a temperature of +5 degrees. Any glue for PVC will do. Of course, it is advisable to first remove the awning to be repaired from the vehicle. The surfaces to be glued must be covered with an even layer of glue, pressed against each other, put some weight on top and wait 2-3 hours. If such a press is not at hand, then you can warm up the area to be repaired, preventing the awning fabric from melting. High temperature accelerates the drying of the glue.Useful tips
In order to accomplish truck awning repair, The following requirements must be met:- If the seam comes apart, treat the tear area with glue.
- Do not neglect degreasing the material before carrying out repair work.
- Watch the edges of the patch. They should not be uneven or frayed.
- When repairing an awning using an industrial hair dryer, you need to monitor the temperature regime. Otherwise, you can easily burn the material.